In Stock, USA Seller, Ships In 24 Hours!!

Brand New, Genuine OEM and 100% Guaranteed

OEM (Original Equipment Manufacturer) Part Direct from Panasonic

Panasonic EYFLA6JR 10.8V Mechanical Pulse Assembly Tool (Wireless / Radio Communication) 1/2” Square Drive Impact Wrench 16 - 53Nm-In Stock-Genuine OEM

Made In Japan

Model # EYFLA6JR

Communicates With A Panasonic Qualifier (Additional Accessory-Not Included-Not Required) (EYFR02B/EYFR03A/EYFR03B/EYFR04A) which provides the operator a clear visual and audio feedback, informing the operator of a pass or fail fastening strategy. Connecting the I/O to line stops or a PLC enables additional error proofing capabilities; reducing defects, increasing overall productivity and product quality which leads to a money savings.

Tool and Manual Only. Does Not Include Batteries, Charger, Remote, Qualifier or Carrying Case

The Panasonic EYFLA6JR is an intelligent cordless auto shut-off mechanical pulse tool. This powerful production tool was designed for ergonomics and provides virtually no torque reaction. The auto shut-off feature is controlled by an onboard CPU, constantly monitors the tool to insure accuracy and repeatability. Wireless capability to remotely adjust settings
1/2" Square Drive Through Hole
Auto Shut-Off Prevents Over Torques
Operator Visual Pass / Fail Indicator
Virtually No Torque Reaction
Min Torque 11.8 ft lb
Max Torque 88.5 ft lb
Min Torque 16 Nm
Max Torque 120 Nm
Weight 3.1 lbs.
Free Speed 2300 rpm
Max Speed 2300 rpm

TYPICAL APPLICATION:

• M8 Bolt (Tensile Bolt) • M10 Bolt (Normal Bolt)

* Final results may have higher torque ranges with hard joints and lower torque ranges

with soft joints

** M14 Bolt (F mode, tightening 3 sec.)

Uses EYFB30 or EYFB32 Lithium-Ion 10.8 Volt Battery (Not Included)

Condition: Brand New, Genuine OEM Panasonic 100% Guaranteed. Very powerful, Well-constructed, tough, dependable tool. Any Questions, please e-mail us.

About:

Operator Ergonomics

The importance of ergonomics on the factory floor continues to grow which is one reason why Panasonic developed this line of cordless assembly tools. The lightweight balanced design, cushioned grip and virtually no torque reaction, helps to reduce operator fatigue; therefore creating a better work environment. In addition, the freedom of a cordless tool allows an operator to work inside vehicles or small work spaces.

Intelligent Auto Shut-Off
Over torqueing, under torqueing and operator influenced torques are recurring issues in assembly. Panasonic’s mechanical pulse tool alleviates those issues with an intelligent auto shut-off feature. The tool incorporates a CPU with an advanced algorithm (program), and during the rundown the CPU looks for the seating torque. Once the tool finds seating torque, the tool then switches to a torque calculation mode and shuts-off when final torque is achieved assuring accuracy and repeatability.

Quick and Easy Tool Programming / Operator Lockout
To safeguard tool settings, the tool is programed using a remote control which eliminates operators from tampering with the tool settings. The easy-to-use remote control can be used to change tool speeds, rehit prevention (double hit), choose between a free running type joint or a prevailing torque type joint, obtain the model number and restore the tool to factory defaults.

Advanced Strategies
Prevent operators from possibly over torqueing fasteners and insure overall product quality. Rehit prevention is a quick change of the tools program and it limits operators from pulling the trigger for a period of time between fasteners.

Reduced Maintenance Cost
It always seems that corporations and owners cut maintenance budgets first. A drop in manpower and budgets can make it hard to keep-up with equipment failures and repairs. Panasonic has doubled the life of their tools by using a high efficiency brushless motor and a hybrid trigger switch. The hybrid switch is connected to the CPU, which controls the motor and brake by eliminating any high current from running through the switch. Utilizing the best components Panasonic tools reduce downtime, parts costs and maintenance repair costs.

Safety & Product Damage Prevention
Manufacturers are finding that operators are injuring themselves by tripping over air hoses and electric tool cables. Switching to Panasonic cordless assembly tools eliminates the safety hazards of air hoses and electric tool cables.
An advantage of using cordless power tools is that they allow you to eliminate air hose and tool cable damage since they can be very abrasive when moved across a finished surface. Panasonic Cordless Tools reduce rework cost and lost production time.

Operator Visual Indicator
Reduce the overall assembly process time with production tools. Panasonic Assembly Tools automatically shuts-off and instantly provides the operator a visual for OK / NOK status indicating to move on to the next fastener. The highly visible LED light can be seen from the rear of the tool and helps the operator know whether to move on to the next fastener or stop and rework the product.

Reduced Energy Costs
Compressed air has become known as the 4th Utility because the significant costs to run an air compressor. Manufacturers are quickly realizing that compressed air is expensive and are looking for alternate options. Cordless tools offer that option and can save up to 95% in electrical cost compared to traditional air tools.

Under Torque Prevention
To prevent loose or under torqued fasteners, the CPU monitors the output torque of the tool. If the torque falls below the selected value due to battery power, the CPU automatically adjusts the tool to deliver the correct power which makes the tool very accurate and repeatable. As the operator runs the tool, the CPU monitors the battery level and when the battery no longer has enough power to reach the required torque the CPU automatically shuts down the tool to prevent under torqued fasteners.

Illuminating the Work Area
When activated a built-in LED light turns on to illuminate the assembly area for faster, easier and more accurate assembly. The LED light promotes visibility improving screw and bit placement therefore reducing cycle time. An additional feature of the tool to conserve battery power is an auto shut-off timer for the LED once the tool is not operated for 5 minutes.

Features:
Panasonic Pulse Tool
Torque controlled range – 16-53 Nm (11.8-39 ft. lbs.) (Based on medium hard joint*)
Maximum Torque in non-shut off mode – Approx. 120 Nm (88.5 ft. lbs.)**
Patented Panasonic CPU controlled auto shut-off
Torque Setting – 30 stages in L1 mode and 30 stages in L2 mode + F mode (non shut-off mode)
Flush Detection Mode Applications
- L1: Use on applications with no pulses before the flush point or when fastening fragile materials like plastic to metal.
- L2: Use on any applications when the tool pulses before achieving the flush point.
Brushless Motor and Hybrid Switch about doubles the life of the tool
Remote control required for “Quick Set” features (See page 11)
Error proofing with OK/NOK indicator
- Radio version required for Panasonic Quality Control Monitoring System (See page 20)
Low Battery Disable – Disables the tool if the battery doesn’t have the capacity to achieve the proper torque
Variable speed trigger/reversible
1/2" Square drive with through hole
Battery indicator lamp (3 stages) and LED work light (ON/OFF Switch)
No Load Speed (Torque Setting: rpm) – Torque Setting 1-30 & F: 0-2300
Rehit Prevention – Disables the tool for a period of time after a good fastening preventing the operator from double hitting the fastener.
Compact size (L x H x W): 6-25/32" x 9-25/32" x 2-61/64"
Light weight 2 lbs.